mcAfee Secure Website
exam =5
exam =6

Exam Code: IC34 ISA-IEC 62443 Cybersecurity Design Specialist

Exam Name: IC34 ISA-IEC 62443 Cybersecurity Design Specialist

Certification Provider: ISA

ISA IC34 ISA-IEC 62443 Cybersecurity Design Specialist Questions & Answers

Reliable & Actual Study Materials for IC34 ISA-IEC 62443 Cybersecurity Design Specialist Exam Success

100 Questions & Answers with Testing Engine

"IC34 ISA-IEC 62443 Cybersecurity Design Specialist: IC34 ISA-IEC 62443 Cybersecurity Design Specialist" Testing Engine covers all the knowledge points of the real ISA IC34 ISA-IEC 62443 Cybersecurity Design Specialist exam.

The latest actual IC34 ISA-IEC 62443 Cybersecurity Design Specialist Questions & Answers from Pass4sure. Everything you need to prepare and get best score at IC34 ISA-IEC 62443 Cybersecurity Design Specialist exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable ISA Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

ISA IC34 ISA-IEC 62443 Cybersecurity Design Specialist Practice Test 91

Question 900

A site implementation finds that a security team proposes aggressive active vulnerability scans during live turbine operation to detect threats. Select TWO statements representing the correction and its confirming test.

  1. Use compatible industrial protocol inspection for restricted command functions
  2. Use approved passive traffic sensing or carefully scheduled safe assessment
  3. Sensor discovery identifies expected device traffic without controller instability
  4. The IDS recognizes new approved traffic without suppressing unauthorized control commands

Explanation

Correct Answers

B:

This change addresses the stated weakness because passive observation can reduce the operational risk of traffic analysis. Confirm the result by checking that sensor discovery identifies expected device traffic without controller instability.

C:

The acceptance result directly demonstrates the requirement has been met. The enabling measure is to use approved passive traffic sensing or carefully scheduled safe assessment; passive observation can reduce the operational risk of traffic analysis.

Incorrect Answers

A:

That step responds to Protocol-aware alert, not the reported issue. Here the relevant design principle is that passive observation can reduce the operational risk of traffic analysis.

D:

This observation comes from Baseline change, a separate industrial condition. It does not prove the required result: sensor discovery identifies expected device traffic without controller instability.

Question 901

A facility engineer encounters this design issue: a process-control network needs multicast status messages but the new firewall drops all multicast traffic. Which proposed action most directly addresses it?

  1. Add negative authorization tests for high-consequence flows
  2. Design bounded multicast handling based on actual group membership and vendor support
  3. Use an approved discovery method or bounded relay compatible with the segmentation design
  4. Provide validated configurations, ownership, and operational runbooks at handover

Explanation

Correct Answer

B:

The proposed control has a clear operational purpose: industrial traffic may use group delivery that needs explicit policy support. Its acceptance evidence is that approved receivers obtain status while other zones do not receive the stream.

Incorrect Answers

A:

This measure is useful for Firewall test negative cases, where a test plan checks that allowed historian traffic works but never checks forbidden PLC programming traffic. In the present case, unplanned multicast blocks or floods can disrupt process communications; the targeted response is different.

C:

The measure is relevant when a controller discovery service relies on broadcasts that a new routed firewall does not forward, but it does not address the fact that unplanned multicast blocks or floods can disrupt process communications.

D:

Firewall ownership handover is a separate issue; in this design, industrial traffic may use group delivery that needs explicit policy support.

Question 902

The system integrator is asked to resolve this condition: a supplier's stolen client certificate remains valid for months after disclosure. Which measure should be selected?

  1. Implement revocation and short-lived or rotatable credential handling
  2. Provide a local operator-controlled means to end remote connectivity promptly
  3. Evaluate an approved plant-initiated remote-support session through a broker
  4. Provide an authorized read-only maintenance interface or role

Explanation

Correct Answer

A:

This change addresses the stated weakness because certificate security depends on renewal and revocation operations. Confirm the result by checking that the stolen certificate fails authentication in a controlled validation.

Incorrect Answers

B:

Emergency disconnect is a separate issue; in this design, certificate security depends on renewal and revocation operations.

C:

The measure is relevant when a plant with strict inbound firewall rules asks a vendor to open permanent Internet port forwarding, but it does not address the fact that a compromised credential may outlive account disablement.

D:

That step responds to Privileged command scope, not the reported issue. Here the relevant design principle is that certificate security depends on renewal and revocation operations.

Question 903

A process installation has a concern where a DCS has shared emergency administrative accounts whose use is never reviewed. Which failure is most likely to matter?

  1. Exposed private keys can permit service impersonation
  2. Untested endpoint security agents may disrupt process execution
  3. Shared emergency credentials can be abused without evidence
  4. Boundary failures can expose otherwise unrestricted services

Explanation

Correct Answer

C:

The unmitigated condition can produce this failure; test remediation by confirming that every emergency login is attributable and triggers review.

Incorrect Answers

A:

This describes the separate issue of TLS certificate storage. For the current system, exceptional privilege must be accountable and tightly governed.

B:

It would matter for Malware control exclusions; the reported weakness instead threatens that shared emergency credentials can be abused without evidence.

D:

This failure can arise in Host-based firewall, for example where a historian has a host firewall disabled because operators assume the perimeter firewall is sufficient. Here the direct exposure is that shared emergency credentials can be abused without evidence.

Question 904

During an OT architecture review, a design contract merely says all security tests should look good to the engineer. What is the most targeted corrective approach?

  1. Agree explicit pass-fail conditions and exception handling before executing tests
  2. Handover approved security baselines, test evidence, operating procedures, and support contacts
  3. Re-execute risk-relevant cases and document the new approved configuration
  4. Assign test performers, witnesses, and acceptance decision owners

Explanation

Correct Answer

A:

The proposed control has a clear operational purpose: test plans are based on observable requirements and agreed thresholds. Its acceptance evidence is that a reviewer can determine the outcome from recorded observations.

Incorrect Answers

B:

This measure is useful for Closeout handover, where the project closes after CSAT but the owner receives no firewall backup, access list, or response contacts. In the present case, subjective criteria may produce disputed acceptance and unsafe exceptions; the targeted response is different.

C:

That step responds to Retest after change, not the reported issue. Here the relevant design principle is that test plans are based on observable requirements and agreed thresholds.

D:

The measure is relevant when an acceptance package lists thirty security checks but assigns no executing or approving authority, but it does not address the fact that subjective criteria may produce disputed acceptance and unsafe exceptions.

Question 905

During control-system design, the team learns that an integrator shows that a vendor can connect but never verifies local emergency disconnection. What specific risk follows?

  1. Monitoring traffic counters do not prove useful detection
  2. Remote access can remain unsafe despite successful authentication
  3. Unsafe testing can interrupt production or safety operations
  4. Aggressive security tests may themselves create a safety incident

Explanation

Correct Answer

B:

The unmitigated condition can produce this failure; test remediation by confirming that a site operator disconnects the vendor and stops new commands.

Incorrect Answers

A:

That concern does not address the immediate risk: remote access can remain unsafe despite successful authentication.

C:

This describes the separate issue of Test prerequisites. For the current system, remote-service acceptance includes revocation and operational override.

D:

It would matter for Safe test traffic; the reported weakness instead threatens that remote access can remain unsafe despite successful authentication.

Question 906

An engineer examines why one design groups production PLCs and visitor Wi-Fi because both use Ethernet. Which statement most accurately explains the design issue?

  1. Conduits express narrowly authorized communication between zones
  2. Zones organize assets with comparable security requirements
  3. OT designs balance boundary protection with deterministic behavior
  4. Availability engineering must extend beyond duplicated appliances

Explanation

Correct Answer

B:

This mechanism is the basis of the design decision. If ignored, technical similarity can obscure different security requirements.

Incorrect Answers

A:

This is relevant to Conduit definition but does not explain the stated process issue. The correct design rationale is that zones organize assets with comparable security requirements.

C:

Zones organize assets with comparable security requirements. The option describes a different kind of control.

D:

Redundant firewall paths is a different problem; the relevant mechanism here is that zones organize assets with comparable security requirements.

Question 907

An industrial project must address this condition: an asset owner buys smart motor drives without asking about security update support. Which TWO selections pair the control and its verification?

  1. Design review catches an insecure service before final hardware assembly
  2. Include threat review, control requirements, design validation, and release evidence throughout development
  3. Specify supported authentication, update, logging, and lifecycle obligations in procurement
  4. The accepted supplier response identifies supported security functions and update process

Explanation

Correct Answers

C:

security capability must be checked before supplier selection. Verify that the accepted supplier response identifies supported security functions and update process.

D:

The relevant step is to specify supported authentication, update, logging, and lifecycle obligations in procurement, consistent with the principle that security capability must be checked before supplier selection.

Incorrect Answers

A:

The stated evidence would be appropriate for Secure lifecycle planning. This design instead needs to show that the accepted supplier response identifies supported security functions and update process.

B:

The measure is relevant when an integrator addresses cybersecurity only when a packaging skid reaches its factory acceptance test, but it does not address the fact that a purchased component may lack the controls needed by the system design.

Question 908

The plant team discovers that switch administration interfaces are reachable from ordinary operator workstations. What should be changed first in the security design?

  1. Separate remote controller data paths from modem administration where supported
  2. Use an intermediate approved access service instead of direct public reachability
  3. Evaluate a supported one-way transfer architecture for the telemetry conduit
  4. Place infrastructure management on a restricted and auditable administration path

Explanation

Correct Answer

D:

The proposed control has a clear operational purpose: management planes need separation from general process and user traffic. Its acceptance evidence is that only approved administration hosts reach switch-management services.

Incorrect Answers

A:

That step responds to Remote field site, not the reported issue. Here the relevant design principle is that management planes need separation from general process and user traffic.

B:

This measure is useful for External maintenance path, where a skid vendor asks for direct Internet port forwarding to an embedded controller. In the present case, compromised user workstations could modify plant transport; the targeted response is different.

C:

Unidirectional telemetry is a separate issue; in this design, management planes need separation from general process and user traffic.

Question 909

In an industrial controls project, two redundant pumping controllers share one unmanaged remote-access router. Which recommendation is most appropriate?

  1. Compare exposure reduction with process outage hazards and choose an approved staged treatment
  2. Document the temporary attack route and require an approved short-lived compensating plan
  3. Assess the router as a common fault and attack dependency for both controllers
  4. Map business and physical services to assets and recovery dependencies

Explanation

Correct Answer

C:

resilience requires examining shared support and communication paths. A useful test is that a single router compromise cannot directly reach both redundant controllers without containment.

Incorrect Answers

A:

The measure is relevant when a continuous distillation process cannot tolerate an extended reboot during an urgent security upgrade, but it does not address the fact that redundant controllers can still share one cyber failure domain.

B:

This measure is useful for Temporary operations risk, where a maintenance bypass makes a process-control interlock temporarily accessible to a portable workstation. In the present case, redundant controllers can still share one cyber failure domain; the targeted response is different.

D:

Business service mapping is a separate issue; in this design, resilience requires examining shared support and communication paths.

Question 910

During an OT architecture review, an industrial Ethernet switch exposes Telnet and unauthenticated HTTP for administration. What is the most targeted corrective approach?

  1. Use approved authenticated or protected time services with documented fallback
  2. Use supported encrypted management, individual accounts, and restricted source paths
  3. Move to supported authenticated SNMP settings with least-privilege roles
  4. Create vendor-approved application control and tested scanning exclusions

Explanation

Correct Answer

B:

Management protocols require confidentiality and identity controls. Confirm completion when plaintext management access fails and approved secure administration succeeds.

Incorrect Answers

A:

That step responds to Time synchronization hardening, not the reported issue. Here the relevant design principle is that management protocols require confidentiality and identity controls.

C:

Legacy SNMP is a separate issue; in this design, management protocols require confidentiality and identity controls.

D:

This measure is useful for Malware control exclusions, where an antivirus product quarantines live DCS runtime files because industrial vendor exclusions were not reviewed. In the present case, plaintext sessions can reveal credentials and sensitive configuration; the targeted response is different.

IC34 ISA-IEC 62443 Cybersecurity Design Specialist Practice Tests