mcAfee Secure Website
exam =5
exam =6

Exam Code: IC34 ISA-IEC 62443 Cybersecurity Design Specialist

Exam Name: IC34 ISA-IEC 62443 Cybersecurity Design Specialist

Certification Provider: ISA

ISA IC34 ISA-IEC 62443 Cybersecurity Design Specialist Questions & Answers

Reliable & Actual Study Materials for IC34 ISA-IEC 62443 Cybersecurity Design Specialist Exam Success

100 Questions & Answers with Testing Engine

"IC34 ISA-IEC 62443 Cybersecurity Design Specialist: IC34 ISA-IEC 62443 Cybersecurity Design Specialist" Testing Engine covers all the knowledge points of the real ISA IC34 ISA-IEC 62443 Cybersecurity Design Specialist exam.

The latest actual IC34 ISA-IEC 62443 Cybersecurity Design Specialist Questions & Answers from Pass4sure. Everything you need to prepare and get best score at IC34 ISA-IEC 62443 Cybersecurity Design Specialist exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable ISA Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

ISA IC34 ISA-IEC 62443 Cybersecurity Design Specialist Practice Test 72

Question 710

Which recorded result would establish the control is working when a CRS lists a security control but leaves test owner and environment undefined?

  1. Every critical requirement has an owner and executable acceptance evidence
  2. Different zones show traceable treatment appropriate to their assessed risk
  3. The accepted design controls the conduit without exceeding scan-cycle limits
  4. Operations can immediately end a live vendor session during a drill

Explanation

Correct Answer

A:

The relevant step is to assign test responsibility, success condition, and safe test boundary to each control, consistent with the principle that verification planning begins before implementation.

Incorrect Answers

B:

The proposed result does not show that every critical requirement has an owner and executable acceptance evidence.

C:

This check belongs to Encryption exception. For the current issue, acceptance should establish that every critical requirement has an owner and executable acceptance evidence.

D:

This observation comes from Remote access termination, a separate industrial condition. It does not prove the required result: every critical requirement has an owner and executable acceptance evidence.

Question 711

A facility engineer encounters this design issue: an engineering team uses a vendor device checklist as the only system requirement set. Which proposed action most directly addresses it?

  1. Compare component evidence with the separately required system-level implementation
  2. Document the unmet gap and require a treatment before acceptance
  3. Map applicable Part 3-3 technical requirements to the configured system
  4. Evaluate the supplier's secure product development and maintenance processes

Explanation

Correct Answer

C:

This change addresses the stated weakness because part 3-3 specifies system technical security requirements and levels. Confirm the result by checking that the system test plan addresses relevant foundational categories and boundary conditions.

Incorrect Answers

A:

The measure is relevant when a catalog cites component requirements under ISA/IEC 62443-4-2 as evidence of sitewide compliance, but it does not address the fact that device checklists may miss system-level protection needs.

B:

This measure is useful for Target-versus-achieved gap, where a remote substation has a high SL-T but its installed gateways cannot meet required authentication controls. In the present case, device checklists may miss system-level protection needs; the targeted response is different.

D:

That step responds to Secure product process, not the reported issue. Here the relevant design principle is that part 3-3 specifies system technical security requirements and levels.

Question 712

Which technical principle best explains the design concern where a pulp mill adds an IIoT gateway after the system risk assessment is approved?

  1. Risk assessment is revisited for material architecture changes
  2. A risk-based design needs testable outcomes for significant threats
  3. Risk treatment should distinguish read-only visibility from actuator control
  4. Risk treatment requires both technical selection and operational accountability

Explanation

Correct Answer

A:

This mechanism is the basis of the design decision. If ignored, design assumptions become stale when connectivity changes.

Incorrect Answers

B:

This principle applies to Risk-to-test linkage, such as when a grid control risk report calls command spoofing important but proposes no validation method. The current case depends on the concept that risk assessment is revisited for material architecture changes.

C:

Conduit consequence is a different problem; the relevant mechanism here is that risk assessment is revisited for material architecture changes.

D:

This is relevant to Risk treatment ownership but does not explain the stated process issue. The correct design rationale is that risk assessment is revisited for material architecture changes.

Question 713

In an industrial controls project, a firewall is upgraded without saving the active policy and interface mapping. Which recommendation is most appropriate?

  1. Add negative authorization tests for high-consequence flows
  2. Use an approved discovery method or bounded relay compatible with the segmentation design
  3. Export a protected configuration and rehearse supported rollback steps
  4. Select protocol-compatible session policies within approved security constraints

Explanation

Correct Answer

C:

Boundary devices need recoverable configuration state. Confirm completion when the prechange rules can be restored and verified in a controlled test.

Incorrect Answers

A:

That step responds to Firewall test negative cases, not the reported issue. Here the relevant design principle is that boundary devices need recoverable configuration state.

B:

The measure is relevant when a controller discovery service relies on broadcasts that a new routed firewall does not forward, but it does not address the fact that failed upgrades may leave no trusted return configuration.

D:

This measure is useful for Protocol-specific timeout, where a slow industrial polling session is dropped because the firewall uses an aggressive generic idle timeout. In the present case, failed upgrades may leave no trusted return configuration; the targeted response is different.

Question 714

The asset owner asks how to resolve and verify this finding: an IDS signature package is pushed to production and begins flagging normal protocol frames as malicious. Which TWO statements belong together?

  1. Validate detection-content changes on a representative traffic replay before deployment
  2. New signatures detect selected threats without unacceptable normal-traffic disruption
  3. Loss of the sensor yields the specified safe and available process behavior
  4. Forward protected logs to a separate controlled collection system

Explanation

Correct Answers

A:

This change addresses the stated weakness because security detection updates need regression testing. Confirm the result by checking that new signatures detect selected threats without unacceptable normal-traffic disruption.

B:

The acceptance result directly demonstrates the requirement has been met. The enabling measure is to validate detection-content changes on a representative traffic replay before deployment; security detection updates need regression testing.

Incorrect Answers

C:

This check belongs to IDS fail-safe. For the current issue, acceptance should establish that new signatures detect selected threats without unacceptable normal-traffic disruption.

D:

Log integrity is a separate issue; in this design, security detection updates need regression testing.

Question 715

A system has this condition: a production historian is queried directly from Internet-facing corporate applications. Which principle explains the appropriate treatment?

  1. Zones organize assets with comparable security requirements
  2. Field-site architectures must isolate communications management from actuation
  3. A DMZ mediates data exchange between different trust domains
  4. Safety-related systems need risk-appropriate separation and control

Explanation

Correct Answer

C:

This concept explains why the control is needed: a DMZ mediates data exchange between different trust domains. Implementation can be checked by confirming that plant control nodes accept no direct sessions from public or office-facing endpoints.

Incorrect Answers

A:

This principle applies to Zone grouping, such as when one design groups production PLCs and visitor Wi-Fi because both use Ethernet. The current case depends on the concept that a DMZ mediates data exchange between different trust domains.

B:

A DMZ mediates data exchange between different trust domains. The option describes a different kind of control.

D:

Safety-zone separation is a different problem; the relevant mechanism here is that a DMZ mediates data exchange between different trust domains.

Question 716

The system integrator is asked to resolve this condition: a low-latency motion-control network is routed through a heavily loaded web proxy. Which measure should be selected?

  1. Group systems by function, risk, access needs, and consequence rather than medium
  2. Design appropriate failure-domain independence and tested high-availability behavior
  3. Preserve validated process timing while placing compatible controls at appropriate boundaries
  4. Evaluate a supported one-way transfer architecture for the telemetry conduit

Explanation

Correct Answer

C:

OT designs balance boundary protection with deterministic behavior. Confirm completion when worst-case command latency remains within the tested process requirement.

Incorrect Answers

A:

That step responds to Zone grouping, not the reported issue. Here the relevant design principle is that oT designs balance boundary protection with deterministic behavior.

B:

The measure is relevant when two industrial firewalls are in series but share one unsupervised power supply, but it does not address the fact that a security middlebox may violate real-time control deadlines.

D:

Unidirectional telemetry is a separate issue; in this design, oT designs balance boundary protection with deterministic behavior.

Question 717

A commissioning team sees that a vendor commissions the firewall but leaves no local change procedure or emergency contact. Which TWO choices specify a control and an observable result?

  1. Provide validated configurations, ownership, and operational runbooks at handover
  2. Export a protected configuration and rehearse supported rollback steps
  3. Approved receivers obtain status while other zones do not receive the stream
  4. Plant staff can review logs and follow approved incident isolation steps

Explanation

Correct Answers

A:

This change addresses the stated weakness because commissioning includes sustainable administration and incident readiness. Confirm the result by checking that plant staff can review logs and follow approved incident isolation steps.

D:

The acceptance result directly demonstrates the requirement has been met. The enabling measure is to provide validated configurations, ownership, and operational runbooks at handover; commissioning includes sustainable administration and incident readiness.

Incorrect Answers

B:

This measure is useful for Firewall configuration backup, where a firewall is upgraded without saving the active policy and interface mapping. In the present case, a security boundary without support procedures can become unmanageable; the targeted response is different.

C:

The proposed result does not show that plant staff can review logs and follow approved incident isolation steps.

Question 718

An OT risk review finds that an external integrator's account remains active long after the commissioning contract ends. What is the most immediate unresolved exposure?

  1. Orphaned third-party accounts can be abused later
  2. Unrestricted transfer can introduce malicious or unapproved binaries
  3. Connection logs alone may not expose misuse inside the plant
  4. Invisible remote actions may conflict with onsite operation

Explanation

Correct Answer

A:

This is the relevant failure mode for the described process. supplier access rights should follow contract and task lifecycle. Reduce exposure by taking this step: automate expiration and periodic recertification of supplier identities.

Incorrect Answers

B:

It would matter for Remote file transfer; the reported weakness instead threatens that orphaned third-party accounts can be abused later.

C:

This describes the separate issue of Supplier access auditing. For the current system, supplier access rights should follow contract and task lifecycle.

D:

This failure can arise in Remote screen control, for example where a diagnostics contractor can operate the HMI remotely while the local panel lacks session indication. Here the direct exposure is that orphaned third-party accounts can be abused later.

Question 719

The plant team discovers that a laboratory-tested industrial gateway is installed in an unlocked public cabinet at the site. What should be changed first in the security design?

  1. Add site physical-access verification to the cybersecurity acceptance checklist
  2. Test high-consequence negative access paths before operational handover
  3. Record the defect and require remediation or formal approved risk disposition
  4. Require revision-matched witness records and firmware identity at acceptance

Explanation

Correct Answer

A:

CSAT includes relevant physical environment and access controls. Confirm completion when the deployed cabinet and console are restricted to authorized personnel.

Incorrect Answers

B:

Commissioning negative path is a separate issue; in this design, cSAT includes relevant physical environment and access controls.

C:

This measure is useful for Test defect disposition, where a CFAT finds that one vendor account bypasses MFA but the project labels the test passed. In the present case, physical installation can undo otherwise sound logical safeguards; the targeted response is different.

D:

The measure is relevant when a factory security test is performed on a different firmware build from the units delivered, but it does not address the fact that physical installation can undo otherwise sound logical safeguards.

Question 720

Which recorded result would establish the control is working when a critical firmware change is performed through a vendor remote session with no session record?

  1. The technician can service the assigned skid but not the turbine controllers
  2. Reviewers can identify operator, target, window, and approved actions
  3. A shift supervisor terminates the session during a drill
  4. The stolen certificate fails authentication in a controlled validation

Explanation

Correct Answer

B:

The acceptance result directly demonstrates the requirement has been met. The enabling measure is to enable appropriate audited session metadata or monitored recording under policy; traceable remote sessions support incident review and compliance.

Incorrect Answers

A:

This observation comes from Vendor least privilege, a separate industrial condition. It does not prove the required result: reviewers can identify operator, target, window, and approved actions.

C:

The stated evidence would be appropriate for Emergency disconnect. This design instead needs to show that reviewers can identify operator, target, window, and approved actions.

D:

The proposed result does not show that reviewers can identify operator, target, window, and approved actions.

IC34 ISA-IEC 62443 Cybersecurity Design Specialist Practice Tests