mcAfee Secure Website
exam =5
exam =6

Exam Code: IC34 ISA-IEC 62443 Cybersecurity Design Specialist

Exam Name: IC34 ISA-IEC 62443 Cybersecurity Design Specialist

Certification Provider: ISA

ISA IC34 ISA-IEC 62443 Cybersecurity Design Specialist Questions & Answers

Reliable & Actual Study Materials for IC34 ISA-IEC 62443 Cybersecurity Design Specialist Exam Success

100 Questions & Answers with Testing Engine

"IC34 ISA-IEC 62443 Cybersecurity Design Specialist: IC34 ISA-IEC 62443 Cybersecurity Design Specialist" Testing Engine covers all the knowledge points of the real ISA IC34 ISA-IEC 62443 Cybersecurity Design Specialist exam.

The latest actual IC34 ISA-IEC 62443 Cybersecurity Design Specialist Questions & Answers from Pass4sure. Everything you need to prepare and get best score at IC34 ISA-IEC 62443 Cybersecurity Design Specialist exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable ISA Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

ISA IC34 ISA-IEC 62443 Cybersecurity Design Specialist Practice Test 14

Question 130

Which TWO choices form a sound engineering response and acceptance check for a situation where a controller historian link traverses one firewall with no failover strategy despite 24/7 operations?

  1. Configure appropriate security event logging without overloading the device
  2. Select an approved high-availability architecture and verify safe failure behavior
  3. Planned failover preserves required process data within outage tolerance
  4. Test traffic matches the intended restrictive rule

Explanation

Correct Answers

B:

boundary controls need availability planning appropriate to the process. Verify that planned failover preserves required process data within outage tolerance.

C:

The relevant step is to select an approved high-availability architecture and verify safe failure behavior, consistent with the principle that boundary controls need availability planning appropriate to the process.

Incorrect Answers

A:

Firewall logging is a separate issue; in this design, boundary controls need availability planning appropriate to the process.

D:

This check belongs to Rule order precedence. For the current issue, acceptance should establish that planned failover preserves required process data within outage tolerance.

Question 131

Which recorded result would establish the control is working when a factory switch uses a read-write community string shared with monitoring staff?

  1. Monitoring retrieves counters but cannot alter switch configuration
  2. Plaintext management access fails and approved secure administration succeeds
  3. A controlled test shows network and controller logs align within tolerance
  4. Only authorized collector and administration services connect to the host

Explanation

Correct Answer

A:

The evidence links the outcome to the security mechanism: monitoring access should not automatically grant configuration authority. The corresponding design step is to move to supported authenticated SNMP settings with least-privilege roles.

Incorrect Answers

B:

This check belongs to Secure switch management. For the current issue, acceptance should establish that monitoring retrieves counters but cannot alter switch configuration.

C:

The proposed result does not show that monitoring retrieves counters but cannot alter switch configuration.

D:

This observation comes from Host-based firewall, a separate industrial condition. It does not prove the required result: monitoring retrieves counters but cannot alter switch configuration.

Question 132

An industrial facility has this weakness: a sensor reports normal health but an unauthorized engineering workstation can still start write sessions. Which adverse outcome does it create?

  1. Subjective criteria may produce disputed acceptance and unsafe exceptions
  2. Incomplete handover can erode protections after the integrator leaves
  3. System status indicators do not prove boundary enforcement
  4. Unowned checks can be skipped or misinterpreted

Explanation

Correct Answer

C:

The scenario exposes this outcome because commissioning should prove critical prohibited behavior is blocked. The intended treatment is to test high-consequence negative access paths before operational handover.

Incorrect Answers

A:

It would matter for Acceptance criteria agreement; the reported weakness instead threatens that system status indicators do not prove boundary enforcement.

B:

That concern does not address the immediate risk: system status indicators do not prove boundary enforcement.

D:

This failure can arise in Test plan ownership, for example where an acceptance package lists thirty security checks but assigns no executing or approving authority. Here the direct exposure is that system status indicators do not prove boundary enforcement.

Question 133

A system review identifies that an IDS sensor monitors the enterprise perimeter but misses PLC-to-PLC traffic inside the control zone. Select TWO: a suitable action and its direct acceptance evidence.

  1. Tune detection against authorized maintenance patterns without disabling key protections
  2. A test lateral connection inside the plant appears in the selected sensor's records
  3. The IDS recognizes new approved traffic without suppressing unauthorized control commands
  4. Position sensors to observe the relevant industrial conduits safely

Explanation

Correct Answers

B:

This observation tests the intended change: position sensors to observe the relevant industrial conduits safely. It matters because sensor placement follows high-consequence communication paths.

D:

The proposed control has a clear operational purpose: sensor placement follows high-consequence communication paths. Its acceptance evidence is that a test lateral connection inside the plant appears in the selected sensor's records.

Incorrect Answers

A:

That step responds to False-positive handling, not the reported issue. Here the relevant design principle is that sensor placement follows high-consequence communication paths.

C:

This observation comes from Baseline change, a separate industrial condition. It does not prove the required result: a test lateral connection inside the plant appears in the selected sensor's records.

Question 134

Which risk should the designer prioritize in this scenario: an integrator checks only password policy and declares that every foundational category meets its target?

  1. Secure hardware alone cannot sustain consistent operational protection
  2. Narrow testing can hide major gaps in other categories
  3. A target number does not automatically establish implemented capability
  4. Previously achieved assurance can become stale after system modifications

Explanation

Correct Answer

B:

The risk follows directly from the present design gap. A targeted safeguard is to verify applicable requirements for identification, use, integrity, flows, events, confidentiality, and availability; verify that the review includes evidence for each relevant category rather than a single control.

Incorrect Answers

A:

That concern does not address the immediate risk: narrow testing can hide major gaps in other categories.

C:

It would matter for Target-versus-achieved gap; the reported weakness instead threatens that narrow testing can hide major gaps in other categories.

D:

This describes the separate issue of Security reassessment. For the current system, security level claims require appropriately scoped multi-control evidence.

Question 135

A commissioning team sees that a field technician loads a firmware file found on an unverified file-sharing service. Which TWO choices specify a control and an observable result?

  1. Verify package provenance and signature using supported vendor methods
  2. A tampered image is rejected before the device update proceeds
  3. The factory default fails while assigned maintenance credentials work
  4. Use approved authenticated or protected time services with documented fallback

Explanation

Correct Answers

A:

Authentic software updates are a basic integrity control. Confirm completion when a tampered image is rejected before the device update proceeds.

B:

The evidence links the outcome to the security mechanism: authentic software updates are a basic integrity control. The corresponding design step is to verify package provenance and signature using supported vendor methods.

Incorrect Answers

C:

This check belongs to Default local accounts. For the current issue, acceptance should establish that a tampered image is rejected before the device update proceeds.

D:

Time synchronization hardening is a separate issue; in this design, authentic software updates are a basic integrity control.

Question 136

A process installation has a concern where an office workstation can reach every industrial zone even though only one historian feed is needed. Which failure is most likely to matter?

  1. Unattributed login weakens accountability for control actions
  2. Unrestricted lateral traffic undermines zone separation
  3. Valid identity by itself does not justify every action
  4. A flood can deny legitimate process communication

Explanation

Correct Answer

B:

This is the relevant failure mode for the described process. foundational requirement RDF addresses constraining communication paths. Reduce exposure by taking this step: define and enforce narrowly authorized conduits and boundary filtering.

Incorrect Answers

A:

It would matter for Identification and authentication; the reported weakness instead threatens that unrestricted lateral traffic undermines zone separation.

C:

This failure can arise in Use control, for example where a valid process operator can edit firewall rules even though the job requires read-only trend viewing. Here the direct exposure is that unrestricted lateral traffic undermines zone separation.

D:

This describes the separate issue of Resource availability. For the current system, foundational requirement RDF addresses constraining communication paths.

Question 137

Which technical principle best explains the design concern where a remote engineer ignores a shutdown instruction while a process incident develops?

  1. Brokered sessions can avoid unconditional inbound exposure
  2. Traceable remote sessions support incident review and compliance
  3. Certificate security depends on renewal and revocation operations
  4. Local emergency access control is part of remote-support design

Explanation

Correct Answer

D:

The reasoning fits the present industrial setting. The needed response is to provide a local operator-controlled means to end remote connectivity promptly, rather than relying on unrelated protections.

Incorrect Answers

A:

OT-initiated access is a different problem; the relevant mechanism here is that local emergency access control is part of remote-support design.

B:

This principle applies to Remote session recording, such as when a critical firmware change is performed through a vendor remote session with no session record. The current case depends on the concept that local emergency access control is part of remote-support design.

C:

This is relevant to Certificate revocation but does not explain the stated process issue. The correct design rationale is that local emergency access control is part of remote-support design.

Question 138

During an OT architecture review, a supplier advertises SL-C for a controller and the integrator assumes the full plant automatically meets it. What is the most targeted corrective approach?

  1. Derive and document the target security level from the approved risk assessment
  2. Keep the foundational categories visible in the assessment record
  3. Specify individual identification and appropriate authentication methods
  4. Evaluate component capability separately from assembled system safeguards

Explanation

Correct Answer

D:

sL-C describes inherent security capabilities rather than total achieved posture. Verify that the integrator identifies extra controls needed beyond the controller's native features.

Incorrect Answers

A:

Target security level is a separate issue; in this design, sL-C describes inherent security capabilities rather than total achieved posture.

B:

This measure is useful for Security level vector, where a consultant averages seven different requirement-category levels into one headline score. In the present case, a capable component does not guarantee secure system integration; the targeted response is different.

C:

That step responds to Identification and authentication, not the reported issue. Here the relevant design principle is that sL-C describes inherent security capabilities rather than total achieved posture.

Question 139

A system has this condition: a gateway contains a third-party library but the supplier has no dependency record. Which principle explains the appropriate treatment?

  1. Supplier delivery state forms part of the security design
  2. Secure development includes post-release vulnerability coordination
  3. Component features do not automatically prove system-level protection
  4. Software dependency visibility supports supplier vulnerability management

Explanation

Correct Answer

D:

This mechanism is the basis of the design decision. If ignored, undocumented dependencies complicate future security remediation.

Incorrect Answers

A:

Default-secure delivery is a different problem; the relevant mechanism here is that software dependency visibility supports supplier vulnerability management.

B:

This is relevant to Vulnerability disclosure but does not explain the stated process issue. The correct design rationale is that software dependency visibility supports supplier vulnerability management.

C:

This principle applies to Component capability limits, such as when a smart relay datasheet claims robust cybersecurity without showing available authentication interfaces. The current case depends on the concept that software dependency visibility supports supplier vulnerability management.

Question 140

A system review identifies that a proposed industrial firewall model is entering end of maintenance while plant life is ten years. Select TWO: a suitable action and its direct acceptance evidence.

  1. Test end-to-end security behavior across the assembled system
  2. The delivered API accepts only documented authenticated requests
  3. The procurement record shows a maintained path through planned operation
  4. Check lifecycle and replacement availability against the plant's support horizon

Explanation

Correct Answers

C:

The evidence links the outcome to the security mechanism: security technology selection includes lifecycle durability. The corresponding design step is to check lifecycle and replacement availability against the plant's support horizon.

D:

Security technology selection includes lifecycle durability. Confirm completion when the procurement record shows a maintained path through planned operation.

Incorrect Answers

A:

This measure is useful for System-integration gap, where a hardened PLC and secure gateway each pass tests separately but their integration uses a shared weak account. In the present case, obsolete security devices can become unpatchable before the process retires; the targeted response is different.

B:

The proposed result does not show that the procurement record shows a maintained path through planned operation.

IC34 ISA-IEC 62443 Cybersecurity Design Specialist Practice Tests