mcAfee Secure Website
23

HP HPE7-A08 Bundle

Exam Code: HPE7-A08

Exam Name HPE Network Switching Professional

Certification Provider: HP

Corresponding Certification: HPE Aruba Networking Certified Professional - Switching

HPE7-A08 Training Materials $19.99
Pass4sure Q&A Sample #1 Pass4sure Q&A Sample #2 Pass4sure Q&A Sample #3 Pass4sure Q&A Sample #4 Pass4sure Q&A Sample #5 Pass4sure Q&A Sample #6 Pass4sure Q&A Sample #7 Pass4sure Q&A Sample #8 Pass4sure Q&A Sample #9 Pass4sure Q&A Sample #10

Reliable & Actual Study Materials for HPE7-A08 Exam Success

The Latest HPE7-A08 Exam Questions as Experienced in the Actual Test!

  • 24
    Questions & Answers

    HPE7-A08 Questions & Answers

    172 Questions & Answers

    Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.

  • exam =30
    Study Guide

    HPE7-A08 Study Guide

    794 PDF Pages

    Study Guide developed by industry experts who have written exams in the past. They are technology-specific IT certification researchers with at least a decade of experience at Fortune 500 companies.

exam =32

HPE Network Switching Professional (HPE7-A08) Practice Tests

Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable HP Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Total Cost: $154.98
Bundle Price: $134.99

Purchase Individually

  • exam =34
    Questions & Answers

    Questions & Answers

    172 Questions

    $124.99
    exam =35
  • exam =36
    Study Guide

    Study Guide

    794 PDF Pages

    $29.99

HP HPE7-A08 Practice Test 15

Question 140

The HPE AOS-CX switching case is: An engineer edits configuration from a console but never checks the startup configuration that will load after reboot. Select TWO: a corrective switching action and separate evidence that the correction worked. (Select TWO.)

  1. Identify client VLAN boundaries, relay targets, routing and DHCP protection controls so hosts obtain addresses from authorized servers.
  2. A lab simulates one member loss and verifies the logical LAG remains up with expected capacity and forwarding.
  3. Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes.
  4. The test environment applies the change, demonstrates its acceptance criteria and restores the baseline through a rehearsed rollback.
  5. Plan resilient management addressing, VRF separation, DNS, time, AAA and emergency access before connecting production uplinks.

Explanation

Correct Answers

C:

The targeted correction for An engineer edits configuration from a console but never checks the startup configuration that will load after reboot is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes. It reduces the risk that a failed change can persist or become impossible to revert if baselines, save behavior and dependencies were never recorded.

D:

A separate operational validation for An engineer edits configuration from a console but never checks the startup configuration that will load after reboot is: The test environment applies the change, demonstrates its acceptance criteria and restores the baseline through a rehearsed rollback. It proves intended behavior instead of accepting configuration presence alone.

Incorrect Answers

A:

This alternative concerns dhcp relay and ip service planning; its associated risk is: A missing relay or permissive rogue-server path can leave new VLAN users disconnected or misconfigured. The observed case An engineer edits configuration from a console but never checks the startup configuration that will load after reboot requires the more specific change staging baseline rollback and maintenance window control. The targeted action is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes.

B:

This alternative concerns lacp bandwidth and uplink resiliency planning; its associated risk is: A multi-chassis bundle planned without a supported peer technology can fail to aggregate or loop after partial failures. The observed case An engineer edits configuration from a console but never checks the startup configuration that will load after reboot requires the more specific change staging baseline rollback and maintenance window control. The targeted action is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes.

E:

This alternative concerns out-of-band management and management vrf design; its associated risk is: A network outage may become unrecoverable when the only management path follows the same failed control or data plane. The observed case An engineer edits configuration from a console but never checks the startup configuration that will load after reboot requires the more specific change staging baseline rollback and maintenance window control. The targeted action is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes.

Question 141

An HPE Aruba Networking engineer observes: A planned firmware upgrade ignores image compatibility and the impact on dual-peer high availability. The corrective solution must keep intended connectivity, segmentation, and operational resilience. Which implementation or troubleshooting step directly resolves the specific network issue?

  1. Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes.
  2. Select a consistent MSTP region/root placement or appropriate VSX/VSF active uplink design based on the actual Layer 2 topology.
  3. Plan resilient management addressing, VRF separation, DNS, time, AAA and emergency access before connecting production uplinks.
  4. Design link aggregation with compatible member speed, LACP state, switch support and upstream logical-system boundaries.

Explanation

Correct Answer

A:

The decisive observed condition is: A planned firmware upgrade ignores image compatibility and the impact on dual-peer high availability. The appropriate switching action is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes. It addresses the risk that a failed change can persist or become impossible to revert if baselines, save behavior and dependencies were never recorded. Confirm with: The test environment applies the change, demonstrates its acceptance criteria and restores the baseline through a rehearsed rollback.

Incorrect Answers

B:

This alternative concerns mstp root and vsx edge redundancy plan; its associated risk is: Mismatched MST regions and unintended root placement may block the wrong links and prolong convergence. The observed case A planned firmware upgrade ignores image compatibility and the impact on dual-peer high availability requires the more specific change staging baseline rollback and maintenance window control. The targeted action is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes.

C:

This alternative concerns out-of-band management and management vrf design; its associated risk is: A network outage may become unrecoverable when the only management path follows the same failed control or data plane. The observed case A planned firmware upgrade ignores image compatibility and the impact on dual-peer high availability requires the more specific change staging baseline rollback and maintenance window control. The targeted action is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes.

D:

This alternative concerns lacp bandwidth and uplink resiliency planning; its associated risk is: A multi-chassis bundle planned without a supported peer technology can fail to aggregate or loop after partial failures. The observed case A planned firmware upgrade ignores image compatibility and the impact on dual-peer high availability requires the more specific change staging baseline rollback and maintenance window control. The targeted action is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes.

Question 142

An engineer investigates: A planned firmware upgrade ignores image compatibility and the impact on dual-peer high availability. Which test would independently confirm expected switch behavior?

  1. The NOC reaches the switch through its approved management path during a simulated production uplink failure.
  2. A lab simulates one member loss and verifies the logical LAG remains up with expected capacity and forwarding.
  3. Failure testing verifies expected root, forwarding paths and reachability with one access or distribution component unavailable.
  4. The test environment applies the change, demonstrates its acceptance criteria and restores the baseline through a rehearsed rollback.

Explanation

Correct Answer

D:

The independent acceptance evidence for A planned firmware upgrade ignores image compatibility and the impact on dual-peer high availability is: The test environment applies the change, demonstrates its acceptance criteria and restores the baseline through a rehearsed rollback. It tests whether the team has actually implemented: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes. An enabled interface or saved configuration by itself is not evidence of complete service recovery.

Incorrect Answers

A:

This alternative concerns out-of-band management and management vrf design; its associated risk is: A network outage may become unrecoverable when the only management path follows the same failed control or data plane. The observed case A planned firmware upgrade ignores image compatibility and the impact on dual-peer high availability requires the more specific change staging baseline rollback and maintenance window control. The targeted action is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes.

B:

This alternative concerns lacp bandwidth and uplink resiliency planning; its associated risk is: A multi-chassis bundle planned without a supported peer technology can fail to aggregate or loop after partial failures. The observed case A planned firmware upgrade ignores image compatibility and the impact on dual-peer high availability requires the more specific change staging baseline rollback and maintenance window control. The targeted action is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes.

C:

This alternative concerns mstp root and vsx edge redundancy plan; its associated risk is: Mismatched MST regions and unintended root placement may block the wrong links and prolong convergence. The observed case A planned firmware upgrade ignores image compatibility and the impact on dual-peer high availability requires the more specific change staging baseline rollback and maintenance window control. The targeted action is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes.

Question 143

An HPE Aruba Networking engineer observes: A change window ends with green interfaces but no validation that user VLANs and monitoring still behave as approved. The corrective solution must keep intended connectivity, segmentation, and operational resilience. Which response best satisfies the technical requirement without disrupting unrelated traffic?

  1. Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes.
  2. Identify client VLAN boundaries, relay targets, routing and DHCP protection controls so hosts obtain addresses from authorized servers.
  3. Specify supported SVI gateways, routed uplinks, static or dynamic routing and redundancy placement before implementation.
  4. Map VLAN IDs, switchport tagging, Layer 3 gateways and traffic-policy boundaries to actual user and device populations.

Explanation

Correct Answer

A:

The decisive observed condition is: A change window ends with green interfaces but no validation that user VLANs and monitoring still behave as approved. The appropriate switching action is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes. It addresses the risk that a failed change can persist or become impossible to revert if baselines, save behavior and dependencies were never recorded. Confirm with: The test environment applies the change, demonstrates its acceptance criteria and restores the baseline through a rehearsed rollback.

Incorrect Answers

B:

This alternative concerns dhcp relay and ip service planning; its associated risk is: A missing relay or permissive rogue-server path can leave new VLAN users disconnected or misconfigured. The observed case A change window ends with green interfaces but no validation that user VLANs and monitoring still behave as approved requires the more specific change staging baseline rollback and maintenance window control. The targeted action is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes.

C:

This alternative concerns inter-vlan routing and default gateway placement; its associated risk is: Placing IP gateways on the wrong layer can lead to asymmetric paths, duplicate addresses or traffic hairpinning. The observed case A change window ends with green interfaces but no validation that user VLANs and monitoring still behave as approved requires the more specific change staging baseline rollback and maintenance window control. The targeted action is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes.

D:

This alternative concerns vlan and subnet segmentation design; its associated risk is: A reused VLAN ID or unplanned trunk allowance can bridge separated device classes or silently block a required service. The observed case A change window ends with green interfaces but no validation that user VLANs and monitoring still behave as approved requires the more specific change staging baseline rollback and maintenance window control. The targeted action is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes.

Question 144

The switch operations team reports: A change window ends with green interfaces but no validation that user VLANs and monitoring still behave as approved. What is the most relevant operational exposure in this switching scenario?

  1. A failed change can persist or become impossible to revert if baselines, save behavior and dependencies were never recorded.
  2. A reused VLAN ID or unplanned trunk allowance can bridge separated device classes or silently block a required service.
  3. Placing IP gateways on the wrong layer can lead to asymmetric paths, duplicate addresses or traffic hairpinning.
  4. A missing relay or permissive rogue-server path can leave new VLAN users disconnected or misconfigured.

Explanation

Correct Answer

A:

The direct operational failure mode is: A failed change can persist or become impossible to revert if baselines, save behavior and dependencies were never recorded. It applies to the condition A change window ends with green interfaces but no validation that user VLANs and monitoring still behave as approved. The suitable corrective action is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes. Independently validate using: The test environment applies the change, demonstrates its acceptance criteria and restores the baseline through a rehearsed rollback.

Incorrect Answers

B:

This alternative concerns vlan and subnet segmentation design; its associated risk is: A reused VLAN ID or unplanned trunk allowance can bridge separated device classes or silently block a required service. The observed case A change window ends with green interfaces but no validation that user VLANs and monitoring still behave as approved requires the more specific change staging baseline rollback and maintenance window control. The targeted action is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes.

C:

This alternative concerns inter-vlan routing and default gateway placement; its associated risk is: Placing IP gateways on the wrong layer can lead to asymmetric paths, duplicate addresses or traffic hairpinning. The observed case A change window ends with green interfaces but no validation that user VLANs and monitoring still behave as approved requires the more specific change staging baseline rollback and maintenance window control. The targeted action is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes.

D:

This alternative concerns dhcp relay and ip service planning; its associated risk is: A missing relay or permissive rogue-server path can leave new VLAN users disconnected or misconfigured. The observed case A change window ends with green interfaces but no validation that user VLANs and monitoring still behave as approved requires the more specific change staging baseline rollback and maintenance window control. The targeted action is: Capture existing running and startup configurations, compatible firmware and a rollback plan before scheduled switching changes.

Question 145

An HPE Aruba Networking engineer observes: A branch team pre-provisions three serial numbers but ships a different replacement switch to the site. The corrective solution must keep intended connectivity, segmentation, and operational resilience. Which change best addresses the observed switching requirement?

  1. Correlate operational interface, MAC, VLAN, route and neighbor show output with configuration instead of inferring success from one line of CLI.
  2. Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.
  3. Use the supported UI group and MultiEdit workflow or template-based configuration consistently with each group's configuration mode and device support.
  4. Inspect group-level intended configuration, device-specific overrides and compliance status before treating a switch as centrally standardized.

Explanation

Correct Answer

B:

The decisive observed condition is: A branch team pre-provisions three serial numbers but ships a different replacement switch to the site. The appropriate switching action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push. It addresses the risk that a switch placed in the wrong group can receive incorrect VLANs or fail provisioning because its hardware or mode is incompatible. Confirm with: The inventory matches a registered switch, selected management group and applied expected configuration without unintended overrides.

Incorrect Answers

A:

This alternative concerns interface and route operational show-command discipline; its associated risk is: An administratively up interface does not establish that tagging, adjacency or end-to-end forwarding works correctly. The observed case A branch team pre-provisions three serial numbers but ships a different replacement switch to the site requires the more specific central group onboarding and serial inventory control. The targeted action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.

C:

This alternative concerns central ui multiedit versus template ownership; its associated risk is: Mixing template and UI assumptions can leave changes unapplied, unexpectedly overridden or inconsistent across devices. The observed case A branch team pre-provisions three serial numbers but ships a different replacement switch to the site requires the more specific central group onboarding and serial inventory control. The targeted action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.

D:

This alternative concerns central group override and compliance reconciliation; its associated risk is: Retained local overrides can silently defeat approved group security or uplink settings across otherwise identical branches. The observed case A branch team pre-provisions three serial numbers but ships a different replacement switch to the site requires the more specific central group onboarding and serial inventory control. The targeted action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.

Question 146

An engineer investigates: A branch team pre-provisions three serial numbers but ships a different replacement switch to the site. What network observation should the team require before approving completion?

  1. The inventory matches a registered switch, selected management group and applied expected configuration without unintended overrides.
  2. A test change appears in the intended group method and on the switch running configuration, with drift identified before broader rollout.
  3. A configuration diff distinguishes intentional site exceptions from unintended drift and resolves the latter through an approved workflow.
  4. A validation log includes link counters, VLAN membership, neighbor state and an end-to-end traffic test for the change.

Explanation

Correct Answer

A:

The independent acceptance evidence for A branch team pre-provisions three serial numbers but ships a different replacement switch to the site is: The inventory matches a registered switch, selected management group and applied expected configuration without unintended overrides. It tests whether the team has actually implemented: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push. An enabled interface or saved configuration by itself is not evidence of complete service recovery.

Incorrect Answers

B:

This alternative concerns central ui multiedit versus template ownership; its associated risk is: Mixing template and UI assumptions can leave changes unapplied, unexpectedly overridden or inconsistent across devices. The observed case A branch team pre-provisions three serial numbers but ships a different replacement switch to the site requires the more specific central group onboarding and serial inventory control. The targeted action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.

C:

This alternative concerns central group override and compliance reconciliation; its associated risk is: Retained local overrides can silently defeat approved group security or uplink settings across otherwise identical branches. The observed case A branch team pre-provisions three serial numbers but ships a different replacement switch to the site requires the more specific central group onboarding and serial inventory control. The targeted action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.

D:

This alternative concerns interface and route operational show-command discipline; its associated risk is: An administratively up interface does not establish that tagging, adjacency or end-to-end forwarding works correctly. The observed case A branch team pre-provisions three serial numbers but ships a different replacement switch to the site requires the more specific central group onboarding and serial inventory control. The targeted action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.

Question 147

An HPE Aruba Networking engineer observes: A template group is selected for a site whose operators expect to edit its configuration with UI group workflows. The corrective solution must keep intended connectivity, segmentation, and operational resilience. What is the most defensible operational action before closing the network change?

  1. Use the supported UI group and MultiEdit workflow or template-based configuration consistently with each group's configuration mode and device support.
  2. Confirm the effective running configuration, persistence on reboot and approved backup before saving or upgrading an AOS-CX switch.
  3. Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.
  4. Inspect group-level intended configuration, device-specific overrides and compliance status before treating a switch as centrally standardized.

Explanation

Correct Answer

C:

The decisive observed condition is: A template group is selected for a site whose operators expect to edit its configuration with UI group workflows. The appropriate switching action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push. It addresses the risk that a switch placed in the wrong group can receive incorrect VLANs or fail provisioning because its hardware or mode is incompatible. Confirm with: The inventory matches a registered switch, selected management group and applied expected configuration without unintended overrides.

Incorrect Answers

A:

This alternative concerns central ui multiedit versus template ownership; its associated risk is: Mixing template and UI assumptions can leave changes unapplied, unexpectedly overridden or inconsistent across devices. The observed case A template group is selected for a site whose operators expect to edit its configuration with UI group workflows requires the more specific central group onboarding and serial inventory control. The targeted action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.

B:

This alternative concerns running versus startup configuration and controlled save; its associated risk is: A working session can vanish after a restart, while inadvertently saved emergency settings can persist outside the change window. The observed case A template group is selected for a site whose operators expect to edit its configuration with UI group workflows requires the more specific central group onboarding and serial inventory control. The targeted action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.

D:

This alternative concerns central group override and compliance reconciliation; its associated risk is: Retained local overrides can silently defeat approved group security or uplink settings across otherwise identical branches. The observed case A template group is selected for a site whose operators expect to edit its configuration with UI group workflows requires the more specific central group onboarding and serial inventory control. The targeted action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.

Question 148

The switch operations team reports: A template group is selected for a site whose operators expect to edit its configuration with UI group workflows. Which consequence explains why the described network state is unsuitable?

  1. Retained local overrides can silently defeat approved group security or uplink settings across otherwise identical branches.
  2. A switch placed in the wrong group can receive incorrect VLANs or fail provisioning because its hardware or mode is incompatible.
  3. Mixing template and UI assumptions can leave changes unapplied, unexpectedly overridden or inconsistent across devices.
  4. A working session can vanish after a restart, while inadvertently saved emergency settings can persist outside the change window.

Explanation

Correct Answer

B:

The direct operational failure mode is: A switch placed in the wrong group can receive incorrect VLANs or fail provisioning because its hardware or mode is incompatible. It applies to the condition A template group is selected for a site whose operators expect to edit its configuration with UI group workflows. The suitable corrective action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push. Independently validate using: The inventory matches a registered switch, selected management group and applied expected configuration without unintended overrides.

Incorrect Answers

A:

This alternative concerns central group override and compliance reconciliation; its associated risk is: Retained local overrides can silently defeat approved group security or uplink settings across otherwise identical branches. The observed case A template group is selected for a site whose operators expect to edit its configuration with UI group workflows requires the more specific central group onboarding and serial inventory control. The targeted action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.

C:

This alternative concerns central ui multiedit versus template ownership; its associated risk is: Mixing template and UI assumptions can leave changes unapplied, unexpectedly overridden or inconsistent across devices. The observed case A template group is selected for a site whose operators expect to edit its configuration with UI group workflows requires the more specific central group onboarding and serial inventory control. The targeted action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.

D:

This alternative concerns running versus startup configuration and controlled save; its associated risk is: A working session can vanish after a restart, while inadvertently saved emergency settings can persist outside the change window. The observed case A template group is selected for a site whose operators expect to edit its configuration with UI group workflows requires the more specific central group onboarding and serial inventory control. The targeted action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.

Question 149

An HPE Aruba Networking engineer observes: A newly powered switch appears under an incorrect campus group and adopts unrelated uplink settings. The corrective solution must keep intended connectivity, segmentation, and operational resilience. Which implementation or troubleshooting step directly resolves the specific network issue?

  1. Confirm port optics, fiber or copper type, distance, power and compatible transceiver part numbers before physical installation.
  2. Inspect group-level intended configuration, device-specific overrides and compliance status before treating a switch as centrally standardized.
  3. Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.
  4. Use the supported UI group and MultiEdit workflow or template-based configuration consistently with each group's configuration mode and device support.

Explanation

Correct Answer

C:

The decisive observed condition is: A newly powered switch appears under an incorrect campus group and adopts unrelated uplink settings. The appropriate switching action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push. It addresses the risk that a switch placed in the wrong group can receive incorrect VLANs or fail provisioning because its hardware or mode is incompatible. Confirm with: The inventory matches a registered switch, selected management group and applied expected configuration without unintended overrides.

Incorrect Answers

A:

This alternative concerns rack transceiver compatibility and link budget; its associated risk is: Unsupported optic combinations or bad attenuation can cause intermittent errors even when the link initially reports carrier. The observed case A newly powered switch appears under an incorrect campus group and adopts unrelated uplink settings requires the more specific central group onboarding and serial inventory control. The targeted action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.

B:

This alternative concerns central group override and compliance reconciliation; its associated risk is: Retained local overrides can silently defeat approved group security or uplink settings across otherwise identical branches. The observed case A newly powered switch appears under an incorrect campus group and adopts unrelated uplink settings requires the more specific central group onboarding and serial inventory control. The targeted action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.

D:

This alternative concerns central ui multiedit versus template ownership; its associated risk is: Mixing template and UI assumptions can leave changes unapplied, unexpectedly overridden or inconsistent across devices. The observed case A newly powered switch appears under an incorrect campus group and adopts unrelated uplink settings requires the more specific central group onboarding and serial inventory control. The targeted action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.

Question 150

The HPE AOS-CX switching case is: A newly powered switch appears under an incorrect campus group and adopts unrelated uplink settings. Which TWO choices together provide the targeted remedy and independent validation? (Select TWO.)

  1. Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.
  2. The inventory matches a registered switch, selected management group and applied expected configuration without unintended overrides.
  3. A test change appears in the intended group method and on the switch running configuration, with drift identified before broader rollout.
  4. Inspect group-level intended configuration, device-specific overrides and compliance status before treating a switch as centrally standardized.
  5. Confirm port optics, fiber or copper type, distance, power and compatible transceiver part numbers before physical installation.

Explanation

Correct Answers

A:

The targeted correction for A newly powered switch appears under an incorrect campus group and adopts unrelated uplink settings is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push. It reduces the risk that a switch placed in the wrong group can receive incorrect VLANs or fail provisioning because its hardware or mode is incompatible.

B:

A separate operational validation for A newly powered switch appears under an incorrect campus group and adopts unrelated uplink settings is: The inventory matches a registered switch, selected management group and applied expected configuration without unintended overrides. It proves intended behavior instead of accepting configuration presence alone.

Incorrect Answers

C:

This alternative concerns central ui multiedit versus template ownership; its associated risk is: Mixing template and UI assumptions can leave changes unapplied, unexpectedly overridden or inconsistent across devices. The observed case A newly powered switch appears under an incorrect campus group and adopts unrelated uplink settings requires the more specific central group onboarding and serial inventory control. The targeted action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.

D:

This alternative concerns central group override and compliance reconciliation; its associated risk is: Retained local overrides can silently defeat approved group security or uplink settings across otherwise identical branches. The observed case A newly powered switch appears under an incorrect campus group and adopts unrelated uplink settings requires the more specific central group onboarding and serial inventory control. The targeted action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.

E:

This alternative concerns rack transceiver compatibility and link budget; its associated risk is: Unsupported optic combinations or bad attenuation can cause intermittent errors even when the link initially reports carrier. The observed case A newly powered switch appears under an incorrect campus group and adopts unrelated uplink settings requires the more specific central group onboarding and serial inventory control. The targeted action is: Assign AOS-CX switches to supported Central groups with matching device identities, subscription and intended group configuration method before configuration push.