Question 760
During a storage solution review, this situation emerges: A SAN switch has one giant multi-initiator zone across independent tenants. What is the governing behavior?
Explanation
Correct Answer
The described symptoms are explained by: FC zoning limits fabric discovery but does not replace array LUN masking. A supported corrective step is: Apply narrow supported initiator-target zoning and verify membership. The closing evidence is: Only approved host and array ports appear within the zone.
Incorrect Answers
This addresses a different storage problem, such as: Both Fibre Channel host paths run through one physical switch. That problem points toward design genuinely independent supported FC fabrics. The present incident instead requires apply narrow supported initiator-target zoning and verify membership. and validation that only approved host and array ports appear within the zone.
The proposed principle is relevant when a SAN migration assumes SCSI ALUA and NVMe ANA have identical requirements. Its governing principle is that NVMe over Fabrics requires compatible initiators and network transport. Here the better diagnosis follows FC zoning limits fabric discovery but does not replace array LUN masking.
That alternative could help with the separate condition: An iSCSI initiator can ping storage but TCP session negotiation fails. It would be checked by the initiator logs into its authorized target successfully. For the described case, the necessary correction is apply narrow supported initiator-target zoning and verify membership.