mcAfee Secure Website
exam =5
exam =6

Exam Code: NSE4_FGT_AD-7.6

Exam Name: Fortinet NSE 4 - FortiOS 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE4

Fortinet NSE4_FGT_AD-7.6 Questions & Answers

Reliable & Actual Study Materials for NSE4_FGT_AD-7.6 Exam Success

94 Questions & Answers with Testing Engine

"NSE4_FGT_AD-7.6: Fortinet NSE 4 - FortiOS 7.6 Administrator" Testing Engine covers all the knowledge points of the real Fortinet NSE4_FGT_AD-7.6 exam.

The latest actual NSE4_FGT_AD-7.6 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at NSE4_FGT_AD-7.6 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Fortinet Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Fortinet NSE4_FGT_AD-7.6 Practice Test 42

Question 410

A SOC tunes IPS rules for low false positives. The observed symptom is that an operator disables all IPS logging to reduce noise after an incident. What is the most appropriate next step?

  1. Tune action/event logging to preserve high-value exploit evidence
  2. Add the required exact signature or adjust the supported IPS filter
  3. Restore FortiGuard IPS signature updates and verify installed versions
  4. Investigate the triggering signature and add a narrowly scoped exception if supported

Explanation

Correct Answer

A:

The appropriate control is to tune action/event logging to preserve high-value exploit evidence. Suppressing every IPS event reduces forensic visibility into actual attack attempts.

Incorrect Answers

B:

Add the required exact signature or adjust the supported IPS filter is relevant when broad severity filters miss a vendor-specific vulnerability. Targeted signature coverage is distinct from general severity selection.

C:

Restore FortiGuard IPS signature updates and verify installed versions is useful when IPS engine databases are outdated despite a functioning firewall policy. Attack detection effectiveness depends on current IPS definitions.

D:

Investigate the triggering signature and add a narrowly scoped exception if supported addresses a different symptom: one legitimate application is repeatedly blocked by a specific IPS signature. A signature-level exception can avoid disabling the entire IPS sensor.

Question 411

A FortiGate deployment uses custom IPS signatures. In the effective configuration, a specialized protocol exploit has no suitable built-in IPS signature. Which response is most effective for this case?

  1. Add more precise protocol and pattern constraints to the signature
  2. Override the targeted signature with the approved reset action
  3. Implement a tested custom IPS signature in an appropriate sensor
  4. Validate the signature against representative live test flows in a controlled environment

Explanation

Correct Answer

C:

Implement a tested custom IPS signature in an appropriate sensor directly addresses the requirement. Custom pattern matching can supplement FortiGuard IPS definitions for a specific threat.

Incorrect Answers

A:

Add more precise protocol and pattern constraints to the signature addresses a different symptom: the custom signature matches every benign request containing a common string. Overly generic string matches create widespread false positives.

B:

Override the targeted signature with the approved reset action is relevant when a signature action is default when the incident policy mandates reset. Signature action selection controls how matching sessions are handled.

D:

Validate the signature against representative live test flows in a controlled environment addresses a different symptom: an engineer tests a custom signature only in an offline sample but not on real protocol traffic. Actual decoder and protocol parsing behavior determine whether a signature can match.

Question 412

A FortiGate deployment uses custom IPS signatures. The current operating problem is that the custom signature matches every benign request containing a common string. What should the administrator do to address the stated condition?

  1. Validate the signature against representative live test flows in a controlled environment
  2. Configure an appropriate IPS signature rate count and tracking behavior
  3. Implement a tested custom IPS signature in an appropriate sensor
  4. Add more precise protocol and pattern constraints to the signature

Explanation

Correct Answer

D:

Add more precise protocol and pattern constraints to the signature is the best response. Overly generic string matches create widespread false positives.

Incorrect Answers

A:

Validate the signature against representative live test flows in a controlled environment is relevant when an engineer tests a custom signature only in an offline sample but not on real protocol traffic. Actual decoder and protocol parsing behavior determine whether a signature can match.

B:

Configure an appropriate IPS signature rate count and tracking behavior is useful when an attempted exploit exceeds a threshold but the signature has no rate-based handling. Supported IPS rate-based settings act on repeated matches within the configured window.

C:

Implement a tested custom IPS signature in an appropriate sensor addresses a different symptom: a specialized protocol exploit has no suitable built-in IPS signature. Custom pattern matching can supplement FortiGuard IPS definitions for a specific threat.

Question 413

A FortiGate deployment uses custom IPS signatures. An incident review establishes that an attempted exploit exceeds a threshold but the signature has no rate-based handling. Which action best meets the stated requirement?

  1. Implement a tested custom IPS signature in an appropriate sensor
  2. Configure an appropriate IPS signature rate count and tracking behavior
  3. Override the targeted signature with the approved reset action
  4. Validate the signature against representative live test flows in a controlled environment

Explanation

Correct Answer

B:

Choose configure an appropriate IPS signature rate count and tracking behavior. Supported IPS rate-based settings act on repeated matches within the configured window. Verify the named control at the affected interface, identity, route, or session boundary.

Incorrect Answers

A:

Implement a tested custom IPS signature in an appropriate sensor is useful when a specialized protocol exploit has no suitable built-in IPS signature. Custom pattern matching can supplement FortiGuard IPS definitions for a specific threat.

C:

Override the targeted signature with the approved reset action is relevant when a signature action is default when the incident policy mandates reset. Signature action selection controls how matching sessions are handled.

D:

Validate the signature against representative live test flows in a controlled environment is useful when an engineer tests a custom signature only in an offline sample but not on real protocol traffic. Actual decoder and protocol parsing behavior determine whether a signature can match.

Question 414

A FortiGate deployment uses custom IPS signatures. The administrator observes that a signature action is default when the incident policy mandates reset. What is the most appropriate next step?

  1. Override the targeted signature with the approved reset action
  2. Validate the signature against representative live test flows in a controlled environment
  3. Add more precise protocol and pattern constraints to the signature
  4. Implement a tested custom IPS signature in an appropriate sensor

Explanation

Correct Answer

A:

The appropriate control is to override the targeted signature with the approved reset action. Signature action selection controls how matching sessions are handled.

Incorrect Answers

B:

Validate the signature against representative live test flows in a controlled environment is relevant when an engineer tests a custom signature only in an offline sample but not on real protocol traffic. Actual decoder and protocol parsing behavior determine whether a signature can match.

C:

Add more precise protocol and pattern constraints to the signature is useful when the custom signature matches every benign request containing a common string. Overly generic string matches create widespread false positives.

D:

Implement a tested custom IPS signature in an appropriate sensor addresses a different symptom: a specialized protocol exploit has no suitable built-in IPS signature. Custom pattern matching can supplement FortiGuard IPS definitions for a specific threat.

Question 415

A FortiGate deployment uses custom IPS signatures. During troubleshooting, the engineer finds that an engineer tests a custom signature only in an offline sample but not on real protocol traffic. What should the engineer investigate or verify?

  1. Validate the signature against representative live test flows in a controlled environment
  2. Override the targeted signature with the approved reset action
  3. Add more precise protocol and pattern constraints to the signature
  4. Configure an appropriate IPS signature rate count and tracking behavior

Explanation

Correct Answer

A:

Validate the signature against representative live test flows in a controlled environment directly addresses the requirement. Actual decoder and protocol parsing behavior determine whether a signature can match.

Incorrect Answers

B:

Override the targeted signature with the approved reset action is useful when a signature action is default when the incident policy mandates reset. Signature action selection controls how matching sessions are handled.

C:

Add more precise protocol and pattern constraints to the signature addresses a different symptom: the custom signature matches every benign request containing a common string. Overly generic string matches create widespread false positives.

D:

Configure an appropriate IPS signature rate count and tracking behavior is relevant when an attempted exploit exceeds a threshold but the signature has no rate-based handling. Supported IPS rate-based settings act on repeated matches within the configured window.

Question 416

A firewall is experiencing high CPU after enabling IPS sensors. The team reports that the administrator enables every IPS signature for all traffic regardless of relevance. What should the administrator do to address the stated condition?

  1. Measure memory usage and tune supported IPS resource settings
  2. Inspect IPS process, signature counters and traffic concentration before disabling protection
  3. Scope IPS signatures and filters to the protected application and risk
  4. Validate IPS hardware acceleration and actual software/offload path on the model

Explanation

Correct Answer

C:

Scope IPS signatures and filters to the protected application and risk is the best response. Unnecessary decoding and signature matching can consume inspection resources.

Incorrect Answers

A:

Measure memory usage and tune supported IPS resource settings is relevant when a new security sensor results in conserve mode and dropped sessions. Resource pressure can affect the whole firewall independently of attack action.

B:

Inspect IPS process, signature counters and traffic concentration before disabling protection is useful when high IPS CPU appears only during a narrow application burst. Identifying hot signatures and flow patterns permits a targeted correction.

D:

Validate IPS hardware acceleration and actual software/offload path on the model is relevant when an unsupported fast-path assumption causes a false conclusion that IPS is bypassed. Acceleration support and packet-path visibility vary by platform.

Question 417

A firewall is experiencing high CPU after enabling IPS sensors. In the effective configuration, high IPS CPU appears only during a narrow application burst. Which diagnostic step best resolves the uncertainty?

  1. Inspect IPS process, signature counters and traffic concentration before disabling protection
  2. Measure memory usage and tune supported IPS resource settings
  3. Validate IPS hardware acceleration and actual software/offload path on the model
  4. Scope IPS signatures and filters to the protected application and risk

Explanation

Correct Answer

A:

Choose inspect IPS process, signature counters and traffic concentration before disabling protection. Identifying hot signatures and flow patterns permits a targeted correction. Verify the named control at the affected interface, identity, route, or session boundary.

Incorrect Answers

B:

Measure memory usage and tune supported IPS resource settings addresses a different symptom: a new security sensor results in conserve mode and dropped sessions. Resource pressure can affect the whole firewall independently of attack action.

C:

Validate IPS hardware acceleration and actual software/offload path on the model is relevant when an unsupported fast-path assumption causes a false conclusion that IPS is bypassed. Acceleration support and packet-path visibility vary by platform.

D:

Scope IPS signatures and filters to the protected application and risk is useful when the administrator enables every IPS signature for all traffic regardless of relevance. Unnecessary decoding and signature matching can consume inspection resources.

Question 418

A firewall is experiencing high CPU after enabling IPS sensors. The current operating problem is that an unsupported fast-path assumption causes a false conclusion that IPS is bypassed. Which next step most directly addresses the reported evidence?

  1. Validate IPS hardware acceleration and actual software/offload path on the model
  2. Compare configured IPS actions and resulting session outcomes
  3. Inspect IPS process, signature counters and traffic concentration before disabling protection
  4. Measure memory usage and tune supported IPS resource settings

Explanation

Correct Answer

A:

The appropriate control is to validate IPS hardware acceleration and actual software/offload path on the model. Acceleration support and packet-path visibility vary by platform.

Incorrect Answers

B:

Compare configured IPS actions and resulting session outcomes is relevant when IPS event frequency is mistaken for proof that every signature attempt was blocked. Alert volume is not equivalent to blocked attack count.

C:

Inspect IPS process, signature counters and traffic concentration before disabling protection is useful when high IPS CPU appears only during a narrow application burst. Identifying hot signatures and flow patterns permits a targeted correction.

D:

Measure memory usage and tune supported IPS resource settings addresses a different symptom: a new security sensor results in conserve mode and dropped sessions. Resource pressure can affect the whole firewall independently of attack action.

Question 419

A firewall is experiencing high CPU after enabling IPS sensors. An incident review establishes that a new security sensor results in conserve mode and dropped sessions. What should the engineer investigate or verify?

  1. Inspect IPS process, signature counters and traffic concentration before disabling protection
  2. Scope IPS signatures and filters to the protected application and risk
  3. Measure memory usage and tune supported IPS resource settings
  4. Validate IPS hardware acceleration and actual software/offload path on the model

Explanation

Correct Answer

C:

Measure memory usage and tune supported IPS resource settings directly addresses the requirement. Resource pressure can affect the whole firewall independently of attack action.

Incorrect Answers

A:

Inspect IPS process, signature counters and traffic concentration before disabling protection is relevant when high IPS CPU appears only during a narrow application burst. Identifying hot signatures and flow patterns permits a targeted correction.

B:

Scope IPS signatures and filters to the protected application and risk is useful when the administrator enables every IPS signature for all traffic regardless of relevance. Unnecessary decoding and signature matching can consume inspection resources.

D:

Validate IPS hardware acceleration and actual software/offload path on the model is relevant when an unsupported fast-path assumption causes a false conclusion that IPS is bypassed. Acceleration support and packet-path visibility vary by platform.

Question 420

A firewall is experiencing high CPU after enabling IPS sensors. The administrator observes that IPS event frequency is mistaken for proof that every signature attempt was blocked. Which action is most appropriate in this situation?

  1. Inspect IPS process, signature counters and traffic concentration before disabling protection
  2. Measure memory usage and tune supported IPS resource settings
  3. Compare configured IPS actions and resulting session outcomes
  4. Scope IPS signatures and filters to the protected application and risk

Explanation

Correct Answer

C:

Compare configured IPS actions and resulting session outcomes is the best response. Alert volume is not equivalent to blocked attack count.

Incorrect Answers

A:

Inspect IPS process, signature counters and traffic concentration before disabling protection is useful when high IPS CPU appears only during a narrow application burst. Identifying hot signatures and flow patterns permits a targeted correction.

B:

Measure memory usage and tune supported IPS resource settings addresses a different symptom: a new security sensor results in conserve mode and dropped sessions. Resource pressure can affect the whole firewall independently of attack action.

D:

Scope IPS signatures and filters to the protected application and risk is useful when the administrator enables every IPS signature for all traffic regardless of relevance. Unnecessary decoding and signature matching can consume inspection resources.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests