mcAfee Secure Website
exam =5
exam =6

Exam Code: NSE4_FGT_AD-7.6

Exam Name: Fortinet NSE 4 - FortiOS 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE4

Fortinet NSE4_FGT_AD-7.6 Questions & Answers

Reliable & Actual Study Materials for NSE4_FGT_AD-7.6 Exam Success

94 Questions & Answers with Testing Engine

"NSE4_FGT_AD-7.6: Fortinet NSE 4 - FortiOS 7.6 Administrator" Testing Engine covers all the knowledge points of the real Fortinet NSE4_FGT_AD-7.6 exam.

The latest actual NSE4_FGT_AD-7.6 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at NSE4_FGT_AD-7.6 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Fortinet Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Fortinet NSE4_FGT_AD-7.6 Practice Test 10

Question 90

A support engineer captures FortiGate packet and policy traces. The observed symptom is that a packet capture shows outbound SYN packets but no reply arriving. What should the engineer investigate or verify?

  1. Account for hardware offload before interpreting a missing software flow trace
  2. Apply a precise interface, host and port filter to the sniffer command
  3. Run a narrowly filtered diagnose debug flow trace for the actual source and destination
  4. Compare forward and return interface captures and upstream reachability

Explanation

Correct Answer

D:

The appropriate control is to compare forward and return interface captures and upstream reachability. An absent return packet points to external path or reverse routing issues rather than a blocked local response alone.

Incorrect Answers

A:

Account for hardware offload before interpreting a missing software flow trace is useful when a debug flow trace is empty despite traffic on an NP-accelerated policy. NP6 or NP7 fast-path processing may bypass ordinary debug flow visibility.

B:

Apply a precise interface, host and port filter to the sniffer command addresses a different symptom: packet captures include all interfaces and expose unrelated tenant sessions. Capture filters constrain the output to the case being diagnosed.

C:

Run a narrowly filtered diagnose debug flow trace for the actual source and destination is relevant when an incoming SYN is seen but the engineer does not know which firewall policy drops it. Flow traces show routing, policy decisions and denial reasons for eligible non-offloaded sessions.

Question 91

A busy FortiGate enters memory conserve mode during an application outage. In the effective configuration, the dashboard shows red memory pressure and new sessions fail. Which response best fits the observed symptoms?

  1. Measure per-feature processing load and inspect engine acceleration compatibility
  2. Identify the busy process using FortiOS process and performance diagnostics
  3. Capture memory/process events and recent configuration changes before restart
  4. Inspect current memory, process use and conserve-mode state before changing policies

Explanation

Correct Answer

D:

Inspect current memory, process use and conserve-mode state before changing policies directly addresses the requirement. Memory thresholds and the responsible process explain resource-related session drops.

Incorrect Answers

A:

Measure per-feature processing load and inspect engine acceleration compatibility is useful when enabling additional inspection doubles latency during a peak load. Inspection cost and offload eligibility affect latency under sustained traffic.

B:

Identify the busy process using FortiOS process and performance diagnostics addresses a different symptom: CPU remains high due to a specific proxy-worker process. A process-level view separates proxy overload from generic packet throughput.

C:

Capture memory/process events and recent configuration changes before restart is relevant when an operator reboots to clear conserve mode without preserving diagnostics. Volatile evidence may be lost during reboot, obscuring the cause.

Question 92

A busy FortiGate enters memory conserve mode during an application outage. The current operating problem is that CPU remains high due to a specific proxy-worker process. Which diagnostic step best resolves the uncertainty?

  1. Capture memory/process events and recent configuration changes before restart
  2. Inspect current memory, process use and conserve-mode state before changing policies
  3. Identify the busy process using FortiOS process and performance diagnostics
  4. Measure session-table occupancy and dominant source/destination tuples

Explanation

Correct Answer

C:

Identify the busy process using FortiOS process and performance diagnostics is the best response. A process-level view separates proxy overload from generic packet throughput.

Incorrect Answers

A:

Capture memory/process events and recent configuration changes before restart addresses a different symptom: an operator reboots to clear conserve mode without preserving diagnostics. Volatile evidence may be lost during reboot, obscuring the cause.

B:

Inspect current memory, process use and conserve-mode state before changing policies is relevant when the dashboard shows red memory pressure and new sessions fail. Memory thresholds and the responsible process explain resource-related session drops.

D:

Measure session-table occupancy and dominant source/destination tuples addresses a different symptom: session counts rise sharply while a flood of short connections arrives. Session-table pressure may persist even when CPU metrics look moderate.

Question 93

A busy FortiGate enters memory conserve mode during an application outage. An incident review establishes that session counts rise sharply while a flood of short connections arrives. Which next step most directly addresses the reported evidence?

  1. Measure session-table occupancy and dominant source/destination tuples
  2. Identify the busy process using FortiOS process and performance diagnostics
  3. Inspect current memory, process use and conserve-mode state before changing policies
  4. Measure per-feature processing load and inspect engine acceleration compatibility

Explanation

Correct Answer

A:

Choose measure session-table occupancy and dominant source/destination tuples. Session-table pressure may persist even when CPU metrics look moderate. Verify the named control at the affected interface, identity, route, or session boundary.

Incorrect Answers

B:

Identify the busy process using FortiOS process and performance diagnostics is useful when CPU remains high due to a specific proxy-worker process. A process-level view separates proxy overload from generic packet throughput.

C:

Inspect current memory, process use and conserve-mode state before changing policies addresses a different symptom: the dashboard shows red memory pressure and new sessions fail. Memory thresholds and the responsible process explain resource-related session drops.

D:

Measure per-feature processing load and inspect engine acceleration compatibility is relevant when enabling additional inspection doubles latency during a peak load. Inspection cost and offload eligibility affect latency under sustained traffic.

Question 94

A busy FortiGate enters memory conserve mode during an application outage. The administrator observes that enabling additional inspection doubles latency during a peak load. What should the engineer investigate or verify?

  1. Measure per-feature processing load and inspect engine acceleration compatibility
  2. Capture memory/process events and recent configuration changes before restart
  3. Measure session-table occupancy and dominant source/destination tuples
  4. Identify the busy process using FortiOS process and performance diagnostics

Explanation

Correct Answer

A:

The appropriate control is to measure per-feature processing load and inspect engine acceleration compatibility. Inspection cost and offload eligibility affect latency under sustained traffic.

Incorrect Answers

B:

Capture memory/process events and recent configuration changes before restart addresses a different symptom: an operator reboots to clear conserve mode without preserving diagnostics. Volatile evidence may be lost during reboot, obscuring the cause.

C:

Measure session-table occupancy and dominant source/destination tuples is relevant when session counts rise sharply while a flood of short connections arrives. Session-table pressure may persist even when CPU metrics look moderate.

D:

Identify the busy process using FortiOS process and performance diagnostics is useful when CPU remains high due to a specific proxy-worker process. A process-level view separates proxy overload from generic packet throughput.

Question 95

A busy FortiGate enters memory conserve mode during an application outage. During troubleshooting, the engineer finds that an operator reboots to clear conserve mode without preserving diagnostics. Which action is most appropriate in this situation?

  1. Measure per-feature processing load and inspect engine acceleration compatibility
  2. Capture memory/process events and recent configuration changes before restart
  3. Inspect current memory, process use and conserve-mode state before changing policies
  4. Measure session-table occupancy and dominant source/destination tuples

Explanation

Correct Answer

B:

Capture memory/process events and recent configuration changes before restart directly addresses the requirement. Volatile evidence may be lost during reboot, obscuring the cause.

Incorrect Answers

A:

Measure per-feature processing load and inspect engine acceleration compatibility addresses a different symptom: enabling additional inspection doubles latency during a peak load. Inspection cost and offload eligibility affect latency under sustained traffic.

C:

Inspect current memory, process use and conserve-mode state before changing policies is useful when the dashboard shows red memory pressure and new sessions fail. Memory thresholds and the responsible process explain resource-related session drops.

D:

Measure session-table occupancy and dominant source/destination tuples addresses a different symptom: session counts rise sharply while a flood of short connections arrives. Session-table pressure may persist even when CPU metrics look moderate.

Question 96

An incident response engineer correlates routing and policy failures. The team reports that a policy seems correct but the trace reports no route to the destination. Which diagnostic step best resolves the uncertainty?

  1. Inspect actual session translation fields and central NAT or IP pool rules
  2. Compare source route, VIP matching and internal hairpin NAT assumptions
  3. Inspect existing session state and route cache before clearing only affected sessions
  4. Inspect the active forwarding table and next hop in the effective VDOM

Explanation

Correct Answer

D:

Inspect the active forwarding table and next hop in the effective VDOM is the best response. Firewall policy cannot forward a packet without a selected path.

Incorrect Answers

A:

Inspect actual session translation fields and central NAT or IP pool rules addresses a different symptom: source NAT appears different from the firewall policy's proposed outbound address. The session table shows the applied translation rather than the engineer's intended setting.

B:

Compare source route, VIP matching and internal hairpin NAT assumptions is relevant when a destination VIP works from outside but fails from a local subnet. Reflection traffic may require different matching and translation than true external arrivals.

C:

Inspect existing session state and route cache before clearing only affected sessions is useful when a session keeps an old egress after a network change. Established sessions may retain prior forwarding decisions after a route change.

Question 97

An incident response engineer correlates routing and policy failures. In the effective configuration, only replies drop because the return traffic uses a different firewall path. Which next step most directly addresses the reported evidence?

  1. Check asymmetric routing and stateful session expectations on both directions
  2. Inspect existing session state and route cache before clearing only affected sessions
  3. Compare source route, VIP matching and internal hairpin NAT assumptions
  4. Inspect the active forwarding table and next hop in the effective VDOM

Explanation

Correct Answer

A:

Choose check asymmetric routing and stateful session expectations on both directions. Session state is tied to the observed flow and can reject unexpected return paths.

Incorrect Answers

B:

Inspect existing session state and route cache before clearing only affected sessions is useful when a session keeps an old egress after a network change. Established sessions may retain prior forwarding decisions after a route change.

C:

Compare source route, VIP matching and internal hairpin NAT assumptions addresses a different symptom: a destination VIP works from outside but fails from a local subnet. Reflection traffic may require different matching and translation than true external arrivals.

D:

Inspect the active forwarding table and next hop in the effective VDOM is relevant when a policy seems correct but the trace reports no route to the destination. Firewall policy cannot forward a packet without a selected path.

Question 98

An incident response engineer correlates routing and policy failures. The current operating problem is that a session keeps an old egress after a network change. What should the engineer investigate or verify?

  1. Check asymmetric routing and stateful session expectations on both directions
  2. Inspect actual session translation fields and central NAT or IP pool rules
  3. Inspect the active forwarding table and next hop in the effective VDOM
  4. Inspect existing session state and route cache before clearing only affected sessions

Explanation

Correct Answer

D:

The appropriate control is to inspect existing session state and route cache before clearing only affected sessions. Established sessions may retain prior forwarding decisions after a route change.

Incorrect Answers

A:

Check asymmetric routing and stateful session expectations on both directions is useful when only replies drop because the return traffic uses a different firewall path. Session state is tied to the observed flow and can reject unexpected return paths.

B:

Inspect actual session translation fields and central NAT or IP pool rules addresses a different symptom: source NAT appears different from the firewall policy's proposed outbound address. The session table shows the applied translation rather than the engineer's intended setting.

C:

Inspect the active forwarding table and next hop in the effective VDOM is relevant when a policy seems correct but the trace reports no route to the destination. Firewall policy cannot forward a packet without a selected path.

Question 99

An incident response engineer correlates routing and policy failures. An incident review establishes that a destination VIP works from outside but fails from a local subnet. Which action is most appropriate in this situation?

  1. Check asymmetric routing and stateful session expectations on both directions
  2. Inspect the active forwarding table and next hop in the effective VDOM
  3. Inspect actual session translation fields and central NAT or IP pool rules
  4. Compare source route, VIP matching and internal hairpin NAT assumptions

Explanation

Correct Answer

D:

Compare source route, VIP matching and internal hairpin NAT assumptions directly addresses the requirement. Reflection traffic may require different matching and translation than true external arrivals.

Incorrect Answers

A:

Check asymmetric routing and stateful session expectations on both directions addresses a different symptom: only replies drop because the return traffic uses a different firewall path. Session state is tied to the observed flow and can reject unexpected return paths.

B:

Inspect the active forwarding table and next hop in the effective VDOM is relevant when a policy seems correct but the trace reports no route to the destination. Firewall policy cannot forward a packet without a selected path.

C:

Inspect actual session translation fields and central NAT or IP pool rules is useful when source NAT appears different from the firewall policy's proposed outbound address. The session table shows the applied translation rather than the engineer's intended setting.

Question 100

An incident response engineer correlates routing and policy failures. The administrator observes that source NAT appears different from the firewall policy's proposed outbound address. Which response best fits the observed symptoms?

  1. Check asymmetric routing and stateful session expectations on both directions
  2. Inspect the active forwarding table and next hop in the effective VDOM
  3. Inspect actual session translation fields and central NAT or IP pool rules
  4. Compare source route, VIP matching and internal hairpin NAT assumptions

Explanation

Correct Answer

C:

Inspect actual session translation fields and central NAT or IP pool rules is the best response. The session table shows the applied translation rather than the engineer's intended setting.

Incorrect Answers

A:

Check asymmetric routing and stateful session expectations on both directions is relevant when only replies drop because the return traffic uses a different firewall path. Session state is tied to the observed flow and can reject unexpected return paths.

B:

Inspect the active forwarding table and next hop in the effective VDOM is useful when a policy seems correct but the trace reports no route to the destination. Firewall policy cannot forward a packet without a selected path.

D:

Compare source route, VIP matching and internal hairpin NAT assumptions is relevant when a destination VIP works from outside but fails from a local subnet. Reflection traffic may require different matching and translation than true external arrivals.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests